Available in three finishes with versions for roller coating applications: Diamond (gloss); Pearl (luster, semi-gloss); and Satina (satin-finish).

• Coatings formulated to meet or exceed high quality standard

• Extremely low VOC’s and is environmentally safe

• Easy to use and clean-up

• Suggested Viscosity – 30-40 sec. (Zahn #2 Cup)

• Application – Formulated for roller coaters. Water-Mat 2000 has been tested with virtually all roller coating equipment currently available.
   

• Coating Speed – Designed to coat at a moderate speed. Adjust application speed based on ambient conditions. (Slower speeds at higher humidity) if faster drying speeds are required, you can cut with an 80/20 mixture of water and alcohol.

NOTE: For extremely high usage, we suggest Water-Mat 3000.

Available in three finishes with versions for roller coating applications: Diamond (gloss); Pearl (luster semi-gloss); and Satina (satin-finish).

• Coatings formulated to meet or exceed high quality standard

• Extremely low VOC’s and is environmentally safe

• Easy to use and clean-up

• Requires no special exhaust or ventilation

• Suggested Viscosity – 30-35 sec. (Zahn #2 Cup)

• Application – Water-Mat 3000 is formulated for high volume coating. It has been tested with virtually all roller coating equipment currently available.
   

• Coating Speed – Water-Mat 3000 is designed to coat at high speed. Adjust application speed based on ambient conditions. (Slower speeds at higher humidity) If faster drying speeds are required, you can cut with an 80/20 mixture of water and alcohol.

NOTE: For an average volume, we suggest Water-Mat 2000.

• Viscosity – Water-Mat 2000 & 3000 lacquers are delivered ready to use. Water-Mat 2000 optimal viscosity range is 30-40 seconds,
#2 Zahn Cup. Water-Mat 3000 optimal viscosity range is 30-35 seconds, #2 Zahn Cup. Viscosity can be easily adjusted by adding small amounts of water if necessary.

• PH Levels – 2000 & 3000 is designed to be PH stable. It has an optimal PH range of 8.0-9.0. If it is necessary to raise the PH, add (unscented) household ammonia.

• Cure Tim e – 2000 & 3000 dries to the touch in seconds. Initial water resistance will be evident after 5 minutes. Maximum water resistance will develop within 12-24 hours.

• UV Resistance – 2000 & 3000 will reduce fading in non-light fast inks and dyes. Multiple coats will improve UV resistance and color stability.

• Shelf Life – 2000 & 3000 shows no stability problems after one year of storage. Avoid freezing. Mix well before use.
Guaranteed one year.

• Clean Up – 2000 & 3000 has been formulated for easy clean up. If coating has not dried, simply use warm water. If coating has started to dry, use isopropyl alcohol. After coating has dried, we recommend using Water-Mat Stripper.